TCL PTS No-Rinse Surface Cleaner & Disinfectant (5 Liters) – Antibacterial, Antifungal & Antiviral Formula

Advanced PTS Free-Rinsing Surface Cleaner & Disinfectant (5 Liters) by TCL Laboratories – Alcohol & Quaternary Ammonium Formula with Broad-Spectrum Antibacterial, Antiviral & Antifungal Efficacy for Hospitals, Hotels & Kitchens

High-sensitivity facilities—including intensive care units, diagnostic laboratories, hotel kitchens, and food processing plants—face a daily challenge in balancing disinfection speed with rigorous hygiene standards.
Conventional detergents require significant labor and time for post-rinse water wiping, and leaving wet residues fosters rapid microbial recolonization while standard chemicals risk leaving toxic traces on food-contact surfaces.
Engineered by Technical Chemical Laboratories (TCL) in full alignment with advanced German formulating standards and Egyptian technical criteria, the professional PTS surface disinfectant delivers hospital-grade microbial eradication and rapid, streak-free evaporation without leaving chemical film or requiring a single drop of rinse water.
The core scientific strength of PTS lies in its synergistic dual-action matrix combining aliphatic hydrocarbons and alcohols (> 30%) with quaternary ammonium compounds and selected cationic surface-active agents.
This chemical synergy rapidly disrupts microbial cell membranes and lyses viral envelopes, delivering comprehensive germicidal coverage: it acts as a bactericide against vegetative bacteria, Mycobacterium tuberculosis, and Salmonella; a virucide against non-enveloped viruses such as Adenoviruses as well as enveloped viruses like Influenza and Hepatitis B & C; and a broad-spectrum fungicide.
Engineered with a balanced evaporation rate, it sanitizes surfaces on contact and air-dries automatically, leaving a fully sanitized, protected barrier.
The product stands as the primary choice for infection control teams, institutional housekeeping, and quality assurance managers.
It is formulated safe for direct food-contact zones—including cutting boards, food packaging lines, and kitchen prep equipment—alongside proven performance in sanitizing central HVAC ductwork and coils to prevent airborne fungal dispersion and cross-contamination.
The economical 5-liter bulk jerrican is built for intensive institutional use, easily decanted into direct trigger spray bottles to minimize labor costs, eliminate waste, and ensure maximum cost efficiency in full compliance with Egyptian Standard ES: 6910/2024.

Technical Product Specifications

• Product Trade Name: PTS Free-Rinsing Surface Disinfectant

• Manufacturer: Technical Chemical Laboratories (TCL Egypt)

• Country of Origin: Made in Egypt

• Volume & Container Size: 5 Liters

• Standard Compliance: Complies with Egyptian Standard Specification (ES: 6910/2024)

• Shelf Life: 3 full years from the manufacturing date printed on the container

• Chemical Formulation & Active Profile:

  • Aliphatic hydrocarbons and alcohol: > 30%

  • Cationic surfactants and quaternary ammonium compounds: < 5%

• Microbial Activity & Spectrum:

  • Bactericidal: Destroys vegetative bacteria, Mycobacterium tuberculosis, and Salmonella

  • Virucidal: Eliminates non-enveloped viruses (e.g., Adenoviruses) and enveloped viruses (e.g., Influenza, Hepatitis B & C)

• Fungicidal: Neutralizes environmental fungi and mold buildup in high-humidity zones and ducting

• Purity Standard: 100% free of lard and porcine derivatives

• Application Sector: Institutional, industrial, healthcare, hospitality, and food-service environments

Dilution Rates & Application Protocol

• Zero Dilution: Used undiluted at 100% full strength. Never mix or dilute with water inside spray bottles or containers, preserving exact alcohol and quaternary ammonium ratios to ensure rapid self-evaporation without rinsing.

• Direct Spray Application: Pour raw liquid into clean, dedicated spray trigger bottles, spray directly over pre-cleaned surfaces, and allow to air-dry completely.

Key Features & Performance Advantages

1. True Free-Rinsing Formula: Delivers comprehensive surface sanitization without requiring secondary water rinsing, saving substantial cleaning labor.

2. Broad-Spectrum Germicidal Action: Rapidly inactivates bacteria, fungi, and both enveloped and non-enveloped viruses (including Adenovirus) within seconds.

3. Safe for Food Prep Surfaces: Tailored for cutting boards, food conveyor lines, stainless counters, and prep utensils without leaving harmful toxic residues.

4. Dual Clean & Disinfect Power: Acts simultaneously as a light-duty surface degreasing cleaner and a high-potency sanitizing agent.

5. Rapid Self-Evaporation: Dries cleanly without leaving sticky residues, haze, or streaks across stainless steel, glass, and hard surfaces.

6. HVAC Duct Sanitization: Safely disinfects central AC ducts, evaporators, and filter housings, eliminating mold spores and airborne bacteria.

7. Economic 5L Institutional Pack: Large-volume commercial packaging lowers per-use operational expenses for hospitals, hotels, and industrial sites, backed by a 3-year shelf life.

8. Lard-Free & Certified: Formulated without animal derivatives and fully certified for sensitive commercial and institutional hygiene programs.

Target Applications & Strategic Usage Areas

• Operating Rooms & Intensive Care Units: Disinfecting surgical tables, medical monitors, IV stands, infant incubators, dialysis equipment, and endoscopy surfaces.

• Central AC Systems & Ductwork: Spraying and sanitizing air supply ducts and filtration units across hotels and hospitals to inhibit airborne pathogens.

• Commercial Kitchens & Food Prep Lines: Sanitizing cutting boards, stainless steel prep benches, chef knives, meat slicers, and cheese cutters.

• Hotels & Hospitality Resorts: Sanitizing guest check-in counters, elevator panels, door handles, and room surfaces to safeguard guest health.

• Diagnostic & Research Laboratories: Decontaminating lab benches, centrifuge chambers, and microscope stages between testing protocols.

• Dental & Specialty Clinics: Disinfecting patient treatment chairs, instrument trays, and diagnostic equipment between consultations.

• Pharmaceutical & Food Manufacturing: Sanitizing conveyor belts, processing hoppers, and cleanroom packaging zones.

Step-by-Step Disinfection Protocol

1. Surface Preparation: Pre-clean gross debris, heavy soil, or heavy grease from the target surface to ensure the disinfectant mist contacts pores directly.

2. Fill Spray Applicator: Decant undiluted PTS liquid straight from the jerrican into a clean, dry, chemical-resistant trigger spray bottle.

3. Direct Spraying: Aim the spray nozzle and mist the target area evenly to achieve complete, uniform wet coverage across the entire surface.

4. Contact Time: Allow the disinfectant to remain on the surface for the recommended dwell time to break down microbial cell walls and neutralize pathogens.

5. Air-Dry Without Rinsing: Let the surface air-dry naturally. The active solution evaporates cleanly, leaving a fully sanitized, residue-free protective surface.